Concrete Patio Cost in Irving, TX
Real pricing from 28+ concrete estimates by Irving homeowners. Average patio cost: $7,600.
Get Your Free Estimate →How much does a concrete patio cost in Irving, TX?
A concrete patio in Irving, TX costs an average of $7,600, based on 28+ real estimates. The most popular finish is Broom Finish (36% of projects) at $8.00/SF. For a 430 SF patio, expect to pay $3,440 with broom finish finish. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).
How Irving Compares to DFW
Irving averages $7,600 for concrete — 6% below the DFW metro average of $8,059
Based on 942+ real concrete estimates across 27 DFW cities. Updated February 2026.
Concrete Finish Pricing in Irving
2026 DFW rates — per square foot, materials and labor included
| Finish Type | Price/SF | Volume Price/SF | Popularity |
|---|---|---|---|
Broom Finish | $8.00 | $7.25 | 36% |
Salt Finish | $10.00 | $9.25 | 28% |
Stamped Concrete | $15.00 | $14.25 | 24% |
Colored/Stained | $11.00 | $10.25 | 12% |
Volume pricing applies to pours over 600 SF. All prices include materials, labor, and standard site prep. 3,500 PSI concrete (DFW standard).
Quick Cost Reference
Estimated costs by patio size in Irving
Top Neighborhoods in Irving
Where Irving homeowners are building patios
Serving all Irving neighborhoods and surrounding Dallas County zip codes: 75038, 75039, 75061, 75062, 75063
Concrete Permits in Irving
Dallas County building requirements for patios
City of Irving Building Inspections
$50-$250 depending on project scope
Irving requires permits for covered patios and structures with utilities. Standard ground-level concrete patios are generally permit-exempt. Check specific requirements for your project.
Frequently Asked Questions
Common questions about concrete patios in Irving, TX
Irving concrete patios average $7,600 based on 28 real estimates — one of the most affordable in mid-cities DFW. A 430 SF broom-finish patio costs about $1,720.
Broom finish at $8/SF is Irving's most popular (36%) and most affordable. A 400 SF broom-finish patio costs $3,200. Volume discounts for 600+ SF drop the price to $7.25/SF.
Irving follows standard DFW building codes. All residential patios should use 3,500 PSI concrete with wire mesh reinforcement. 4-inch minimum thickness for patios, 6-inch for driveways.
Irving ($7,600) is about 6% below Dallas ($8,100). Irving homeowners choose more budget-friendly finishes on average. Per-SF material and labor rates are identical across the metro.
Some Irving areas near the Elm Fork Trinity have flood zone restrictions. Check your FEMA designation at the Irving Building Department. Elevated or permeable concrete options may be required in certain zones.
A 430 SF stamped concrete patio in Irving costs approximately $6,450 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $3,440 at $8.00/SF — saving $3,010. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.
In Irving, 24% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Irving backyards, stamped concrete offers better value.
Standard Irving patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Dallas County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.
Concrete Patio Guides
Expert resources for your Irving project
Get Your Free Concrete Estimate in Irving
Join 28+ Irving homeowners who used pAIsa for instant, transparent patio pricing.
Start Your Free Estimate →More Irving Project Pricing
Explore other outdoor living costs in Irving
Concrete Costs Across DFW
Explore concrete patio pricing in other cities