Concrete Patio Cost in Grand Prairie, TX

Grand Prairie concrete patios average $7,400 based on 21 real estimates. A 420 SF broom-finish patio costs $1,680, while stamped runs $3,780.

Broom finish leads at 36% — practical and affordable. Salt finish (30%) is the popular upgrade. Together they account for 66% of Grand Prairie concrete projects.

Ground-level patios without utilities typically don't need permits. Properties near Joe Pool Lake may have additional flood zone requirements. Check with Development Services.

Grand Prairie ($7,400) is about 3% above Arlington ($7,200) — virtually identical. Both mid-cities favor budget finishes and similar patio sizes.

Yes, but lakeside properties may have setback and drainage requirements. Permeable concrete options may be required in some flood zones. Check your FEMA designation first.

A 420 SF stamped concrete patio in Grand Prairie costs approximately $6,300 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $3,360 at $8.00/SF — saving $2,940. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.

In Grand Prairie, 22% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Grand Prairie backyards, stamped concrete offers better value.

Standard Grand Prairie patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Dallas County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.