Stamped Concrete Cost in Fort Worth, TX
$15.00 per square foot, installed. That is about $6,750 for the 450 SF patio Fort Worth homeowners actually build. Prices updated August 2026.
How much does stamped concrete cost in Fort Worth, TX?
Stamped concrete costs $15.00/SF in Fort Worth, TX (2026 DFW rates). For the Fort Worth average patio of 450 SF, that is about $6,750 installed. Large pours qualify for volume pricing at $14.25/SF. Stamped is the #3 most popular finish in Fort Worth at 22% of projects. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).
What you are paying for at $15.00/SF
The slab under stamped concrete is identical to the slab under a broom finish: the same 3,500 PSI mix, the same thickness, the same wire mesh or rebar that DFW’s expansive clay demands. Nothing structural changes.
The difference is the pattern, the color release, and the labor to stamp the surface in the window before the pour sets. On a 450 SF patio that adds $3,150 over broom finish ($15.00/SF against $8.00/SF). That is the whole decision.
Volume pricing: large pours drop stamped from $15.00 to $14.25/SF. On a 450 SF patio that is about $338 back.
How Fort Worth homeowners actually choose
Stamped is the #3 finish in Fort Worth, at 22% of projects. Every rate below is a 2026 DFW rate.
Broom Finish
Classic slip-resistant surface, most affordable option
$8.00/SF
35% · $3,600 at 450 SF
Salt Finish
Subtle texture with rock salt pressed into wet concrete
$10.00/SF
30% · $4,500 at 450 SF
Stamped Concretethis page
Decorative patterns mimicking stone, brick, or slate
$15.00/SF
22% · $6,750 at 450 SF
Colored/Stained
Integral color or acid stain for rich earth tones
$11.00/SF
13% · $4,950 at 450 SF
82 stamp patterns, one price
The pattern you pick does not move the $15.00/SF rate, so choose on looks rather than budget. These are the looks Fort Worth homeowners ask for most.
Natural stone
Irregular, quarried-looking joints. The most requested look in DFW backyards.
Random Stone · Castle Stone · Mesa Stone · Canyon Stone · Flagstone
Slate
Tighter, more uniform texture that reads contemporary next to modern elevations.
Italian Slate · Roman Slate · New England Slate · Fractured Cyprus Slate
Ashlar and cut stone
Squared, repeating courses. Reads formal and pairs well with brick homes.
Grand Ashlar · Cut Slate (Small) · York Bluestone · Verona Stone
Seamless texture
No joint lines at all, just surface texture. Good over large uninterrupted pours.
Sedona Seamless · Arizona · Venetian Marble
Permits in Fort Worth
Fort Worth requires permits for driveways and patios that connect to public right-of-way. Ground-level backyard patios without roofing typically don't need permits. Check HOA requirements separately.
- Office
- City of Fort Worth Development Services
- Fees
- $50-$250 depending on project scope
Stamping does not change whether you need a permit. That depends on where the slab sits, not how it is finished.
Stamped concrete questions from Fort Worth homeowners
Stamped concrete runs $15.00/SF in Fort Worth (2026 DFW rates). At the Fort Worth average patio size of 450 SF that is about $6,750. Large pours qualify for volume pricing at $14.25/SF.
Stamped costs about $3,150 more than broom finish on a 450 SF patio ($15.00/SF vs $8.00/SF). It is the same slab underneath: same 3,500 PSI concrete, same thickness, same reinforcement. You are paying for the pattern, the color release, and the labor to stamp before the pour sets.
Four inches of 3,500 PSI concrete is standard for a Fort Worth patio. Go to six inches under anything heavy such as an outdoor kitchen or a hot tub. DFW sits on expansive clay, so wire mesh or rebar goes in every pour regardless of finish.
82 rentable patterns, grouped into natural stone, slate, ashlar and cut stone, and seamless texture looks. The pattern does not change the $15.00/SF rate, so pick on looks rather than budget.
Fort Worth requires permits for driveways and patios that connect to public right-of-way. Ground-level backyard patios without roofing typically don't need permits. Check HOA requirements separately. Permit fees run $50-$250 depending on project scope through City of Fort Worth Development Services. Stamping does not change whether a permit is required: that depends on where the slab sits, not how it is finished.
Data source: 97+ pAIsaLocal concrete project data points in Fort Worth, TX, collected 2024–August 2026.
Keep reading
Rates last verified .