Concrete Patio Cost in Grapevine, TX
Real pricing from 30+ concrete estimates by Grapevine homeowners. Average patio cost: $8,600.
Get Your Free Estimate →How much does a concrete patio cost in Grapevine, TX?
A concrete patio in Grapevine, TX costs an average of $8,600, based on 30+ real estimates. The most popular finish is Stamped Concrete (36% of projects) at $15.00/SF. For a 480 SF patio, expect to pay $7,200 with stamped concrete finish. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).
How Grapevine Compares to DFW
Grapevine averages $8,600 for concrete — 7% above the DFW metro average of $8,059
Based on 942+ real concrete estimates across 27 DFW cities. Updated February 2026.
Concrete Finish Pricing in Grapevine
2026 DFW rates — per square foot, materials and labor included
| Finish Type | Price/SF | Volume Price/SF | Popularity |
|---|---|---|---|
Stamped Concrete | $15.00 | $14.25 | 36% |
Salt Finish | $10.00 | $9.25 | 28% |
Colored/Stained | $11.00 | $10.25 | 22% |
Broom Finish | $8.00 | $7.25 | 14% |
Volume pricing applies to pours over 600 SF. All prices include materials, labor, and standard site prep. 3,500 PSI concrete (DFW standard).
Quick Cost Reference
Estimated costs by patio size in Grapevine
Top Neighborhoods in Grapevine
Where Grapevine homeowners are building patios
Serving all Grapevine neighborhoods and surrounding Tarrant County zip codes: 76051, 76092, 76034
Concrete Permits in Grapevine
Tarrant County building requirements for patios
City of Grapevine Building Inspections
$75-$300 depending on project scope
Grapevine has historic district overlay rules for some neighborhoods. Standard residential patios without utilities typically don't need permits.
Frequently Asked Questions
Common questions about concrete patios in Grapevine, TX
Grapevine concrete patios average $8,600 based on 30 real estimates. A 480 SF stamped patio costs $4,320-$5,900. Broom finish for the same area runs $1,920.
Stamped concrete (36%) matches Grapevine's charming, established neighborhoods. Salt finish (28%) and colored stains (22%) are popular for pool surrounds near Grapevine Lake properties.
Some Grapevine neighborhoods fall under historic overlay districts with additional design requirements. If you're near Main Street or the historic downtown, check with the city before choosing finishes.
Grapevine averages $8,600 vs Colleyville's $9,800 — about 12% less. Colleyville's larger lots and premium finish preferences drive higher costs. Per-SF rates are identical.
Yes, but properties near Grapevine Lake may have flood zone setback requirements. Check your FEMA flood zone designation. Lakefront properties may need elevated foundations that add $2-$8/SF to the project.
A 480 SF stamped concrete patio in Grapevine costs approximately $7,200 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $3,840 at $8.00/SF — saving $3,360. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.
In Grapevine, 36% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Grapevine backyards, stamped concrete offers better value.
Standard Grapevine patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Tarrant County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.
Concrete Patio Guides
Expert resources for your Grapevine project
Get Your Free Concrete Estimate in Grapevine
Join 30+ Grapevine homeowners who used pAIsa for instant, transparent patio pricing.
Start Your Free Estimate →More Grapevine Project Pricing
Explore other outdoor living costs in Grapevine
Concrete Costs Across DFW
Explore concrete patio pricing in other cities