Concrete Patio Cost in Flower Mound, TX

Flower Mound concrete patios average $8,800 based on 40 real estimates. A 500 SF stamped patio runs $4,500-$6,200, while broom finish for the same size is $2,000-$2,600.

Stamped concrete leads at 36% — Flower Mound homeowners love the natural stone look without the natural stone price. Salt finish (28%) is the mid-range favorite for its clean, modern aesthetic.

Flower Mound's terrain means some lots need grading before concrete pours. Sloped sites may require a retaining wall ($22-$38/SF) or stepped patio design. Your AI estimate accounts for standard site prep.

3,500 PSI is the DFW standard for residential patios in Flower Mound — not 4,000 PSI. Higher PSI isn't necessary for patios and adds cost. Driveways use the same 3,500 PSI with fiber mesh reinforcement.

Yes, patio extensions are common in Flower Mound. The new pour bonds to the existing slab using rebar dowels and bonding agent. Expect a visible cold joint where old meets new — colored or stamped finishes help mask this.

A 500 SF stamped concrete patio in Flower Mound costs approximately $7,500 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $4,000 at $8.00/SF — saving $3,500. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.

In Flower Mound, 36% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Flower Mound backyards, stamped concrete offers better value.

Standard Flower Mound patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Denton County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.