Concrete Patio Cost in Arlington, TX
A concrete patio in Arlington runs $3,200–$10,200 at 2026 DFW rates, $8/SF broom finish to $15/SF stamped. A typical 420 SF patio in broom finish is $3,360.
Get Your Free Estimate →How much does a concrete patio cost in Arlington, TX?
A concrete patio in Arlington, TX runs $3,200–$10,200 at 2026 DFW rates, from a 400 SF broom-finish pour to a 680 SF stamped patio. The most popular finish is Broom Finish (38% of projects) at $8.00/SF. For a 420 SF patio, expect to pay $3,360 with broom finish finish. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).
What's a data point? A fully priced project scenario — an AI-generated estimate or a homeowner inquiry, built on real DFW supplier pricing and 20+ years of field experience. Not every data point is a completed install.
How Arlington Compares to DFW
Arlington patios average 420 SF, 8% below the DFW metro average of 459 SF. Per-SF rates are identical across the metro.
Based on 942+ real concrete data points across 27 DFW cities. Updated October 2026.
Concrete Finish Pricing in Arlington
2026 DFW rates — per square foot, materials and labor included
| Finish Type | Price/SF | Volume Price/SF | Popularity |
|---|---|---|---|
Broom Finish | $8.00 | $7.25 | 38% |
Salt Finish | $10.00 | $9.25 | 28% |
Stamped Concrete | $15.00 | $14.25 | 22% |
Colored/Stained | $11.00 | $10.25 | 12% |
Volume pricing applies to pours of 500 SF or more. All prices include materials, labor, and standard site prep. 3,500 PSI concrete (DFW standard).
What Affects Concrete Patio Cost in Arlington?
Five factors drive most of the price spread in Arlington concrete data points
Broom finish runs $8.00/SF while stamped runs $15.00/SF (2026 DFW rates) — nearly double for the same slab. In Arlington, broom finish leads at 38% of projects.
The average Arlington patio is 420 SF. Pours of 500 SF or more qualify for volume rates — stamped drops from $15.00 to $14.25/SF, broom from $8.00 to $7.25/SF.
Standard patios use a 4-inch slab of 3,500 PSI concrete (DFW standard); areas supporting outdoor kitchens or hot tubs need 6 inches. Tarrant County's expansive clay soil requires 4-6 inches of compacted base to prevent cracking.
Tight gate access, sloped yards, or removing an existing slab adds labor. Wheelbarrow-only access can add 10-15% to the pour cost versus truck-accessible Arlington backyards.
We bill $150 for permits and inspections on an Arlington patio — our line, covering the applications and the inspection trips. Permits go through City of Arlington Building Inspections, who set their own fees for the permits themselves.
Quick Cost Reference
Estimated costs by patio size in Arlington — 2026 DFW rates
* Qualifies for volume pricing — e.g. stamped drops to $14.25/SF ($7,125).
* Qualifies for volume pricing — e.g. stamped drops to $14.25/SF ($11,400).
Who Installs Your Concrete Patio in Arlington?
PaisaLocal pours and finishes concrete patios across Arlington and Tarrant County. A crew lead walks your yard before anything is priced, 3 AI agents build the line-item estimate from real supplier costs, and you pay across four milestones instead of one lump sum up front.
A crew lead walks the yard
We check slope, drainage, access for the truck, and whether an existing slab has to come out before quoting an Arlington pour.
The estimate is built, not guessed
3 AI agents price your patio from live material costs and field-tested DFW labor rates: every line itemized, finish by finish.
Permits and HOA handled
We pull through City of Arlington Building Inspections and prepare the architectural review packet your HOA asks for.
You pay as the work lands
Four milestones: no milestone bills ahead of the work it covers.
Every Arlington installation is poured at 3,500 PSI — the DFW standard for residential patios — with materials and labor included in the $8–$15/SF range above.
Top Neighborhoods in Arlington
Where Arlington homeowners are building patios
Serving all Arlington neighborhoods and surrounding Tarrant County zip codes: 76010, 76011, 76012, 76013, 76014, 76015
Concrete Permits in Arlington
Tarrant County building requirements for patios
$150
Our line, covering the permit applications and the inspection trips — not the city’s own fee schedule.
Arlington has streamlined permitting for standard patios. Ground-level slabs without utilities typically don't need permits. Driveway work requires a right-of-way permit.
Frequently Asked Questions
Common questions about concrete patios in Arlington, TX
A 420 SF broom-finish patio costs $3,360 at $8/SF, while stamped for the same size runs $6,300 at $15/SF. Broom finish is the Arlington favorite at 38% of projects.
Arlington homeowners favor budget-friendly finishes — 38% choose broom finish ($8/SF) vs more expensive stamped or stained. Smaller average patio sizes (420 SF) also keep total costs down compared to premium cities.
Broom finish leads Arlington at 38% — practical, slip-resistant, and the most affordable at $8/SF. Salt finish (28%) is the popular mid-range upgrade. Together they account for 66% of Arlington concrete projects.
Ground-level concrete patios without roofing or utilities typically don't need a permit in Arlington. Covered patios and driveway extensions require permits from Arlington Planning & Development Services.
Both cities use the same $8 to $15/SF rates, so an identical patio prices identically. The difference is finish preference: Arlington skews toward budget broom finish, Fort Worth has more stamped projects.
A 420 SF stamped concrete patio in Arlington costs approximately $6,300 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $3,360 at $8.00/SF — saving $2,940. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.
In Arlington, 22% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Arlington backyards, stamped concrete offers better value.
Standard Arlington patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Tarrant County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.
Data source: 942+ PaisaLocal concrete project data points across DFW, collected 2024–October 2026.
Concrete Patio Guides
Expert resources for your Arlington project
Get Your Free Concrete Estimate in Arlington
Join Arlington homeowners who use pAIsa for instant, transparent patio pricing.
Start Your Free Estimate →More Arlington Project Pricing
Explore other outdoor living costs in Arlington
Concrete Costs Across DFW
Explore concrete patio pricing in other cities