Concrete Patio Cost in Benbrook, TX
Real pricing from 13+ concrete estimates by Benbrook homeowners. Average patio cost: $7,400.
Get Your Free Estimate →How much does a concrete patio cost in Benbrook, TX?
A concrete patio in Benbrook, TX costs an average of $7,400, based on 13+ real estimates. The most popular finish is Salt Finish (34% of projects) at $10.00/SF. For a 420 SF patio, expect to pay $4,200 with salt finish finish. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).
How Benbrook Compares to DFW
Benbrook averages $7,400 for concrete — 8% below the DFW metro average of $8,059
Based on 942+ real concrete estimates across 27 DFW cities. Updated February 2026.
Concrete Finish Pricing in Benbrook
2026 DFW rates — per square foot, materials and labor included
| Finish Type | Price/SF | Volume Price/SF | Popularity |
|---|---|---|---|
Salt Finish | $10.00 | $9.25 | 34% |
Broom Finish | $8.00 | $7.25 | 30% |
Stamped Concrete | $15.00 | $14.25 | 24% |
Colored/Stained | $11.00 | $10.25 | 12% |
Volume pricing applies to pours over 600 SF. All prices include materials, labor, and standard site prep. 3,500 PSI concrete (DFW standard).
Quick Cost Reference
Estimated costs by patio size in Benbrook
Top Neighborhoods in Benbrook
Where Benbrook homeowners are building patios
Serving all Benbrook neighborhoods and surrounding Tarrant County zip codes: 76109, 76116, 76126
Concrete Permits in Benbrook
Tarrant County building requirements for patios
City of Benbrook Community Development
$50-$200 depending on project scope
Benbrook has straightforward permitting. Standard patios typically don't need permits. Properties near Benbrook Lake may have additional setback requirements.
Frequently Asked Questions
Common questions about concrete patios in Benbrook, TX
Benbrook concrete patios average $7,400 based on 13 real estimates. A 420 SF salt-finish patio costs about $2,100, while broom finish is $1,680.
Salt finish (34%) edges out broom finish (30%) in Benbrook — homeowners like the added texture at just $1/SF more. Stamped (24%) is the decorative option.
Properties near Benbrook Lake may have flood zone setback requirements. Check your FEMA designation. Lakeside lots may need drainage planning that adds $500-$1,500 to the project.
Benbrook ($7,400) is about 5% below Fort Worth ($7,800). Similar finish preferences but slightly smaller projects on average. Both share Tarrant County rates.
Absolutely. Benbrook's lakeside setting makes outdoor living spaces especially valuable. A well-designed patio can become a year-round entertainment area in the Texas climate.
A 420 SF stamped concrete patio in Benbrook costs approximately $6,300 at $15.00/SF (2026 DFW rate). For the same size in broom finish, you would pay $3,360 at $8.00/SF — saving $2,940. Volume pricing kicks in at 500+ SF, dropping stamped to $14.25/SF.
In Benbrook, 24% of homeowners choose stamped concrete over pavers. Stamped concrete costs $15/SF installed while pavers typically run $18-$25/SF in DFW. Stamped concrete is one continuous pour (no settling or weed growth between joints), but pavers are easier to repair individually. For most Benbrook backyards, stamped concrete offers better value.
Standard Benbrook patios use 4-inch thick concrete at 3,500 PSI (DFW standard — not the 4,000 PSI some contractors quote). Areas supporting outdoor kitchens or hot tubs need 6-inch slabs. Tarrant County's expansive clay soil requires proper base prep: 4-6 inches of compacted gravel under the slab to prevent cracking from soil movement.
Concrete Patio Guides
Expert resources for your Benbrook project
Get Your Free Concrete Estimate in Benbrook
Join 13+ Benbrook homeowners who used pAIsa for instant, transparent patio pricing.
Start Your Free Estimate →More Benbrook Project Pricing
Explore other outdoor living costs in Benbrook
Concrete Costs Across DFW
Explore concrete patio pricing in other cities