Stamped Concrete Cost in Dallas, TX

$15.00 per square foot, installed. That is about $6,900 for the 460 SF patio Dallas homeowners actually build. Prices updated August 2026.

How much does stamped concrete cost in Dallas, TX?

Stamped concrete costs $15.00/SF in Dallas, TX (2026 DFW rates). For the Dallas average patio of 460 SF, that is about $6,900 installed. Large pours qualify for volume pricing at $14.25/SF. Stamped is the most popular finish in Dallas at 34% of projects. All prices include materials, labor, and 3,500 PSI concrete (DFW standard).

$15.00/SF
Rate
$14.25/SF
Volume Rate
$6,900
Typical 460 SF Patio
34%
Share of Dallas Projects
Source: 71+ DFW concrete data points by pAIsaLocalLast updated: August 2026

What you are paying for at $15.00/SF

The slab under stamped concrete is identical to the slab under a broom finish: the same 3,500 PSI mix, the same thickness, the same wire mesh or rebar that DFW’s expansive clay demands. Nothing structural changes.

The difference is the pattern, the color release, and the labor to stamp the surface in the window before the pour sets. On a 460 SF patio that adds $3,220 over broom finish ($15.00/SF against $8.00/SF). That is the whole decision.

Volume pricing: large pours drop stamped from $15.00 to $14.25/SF. On a 460 SF patio that is about $345 back.

How Dallas homeowners actually choose

Stamped is the most requested finish in Dallas, at 34% of projects. Every rate below is a 2026 DFW rate.

Stamped Concretethis page

Decorative patterns mimicking stone, brick, or slate

$15.00/SF

34% · $6,900 at 460 SF

Colored/Stained

Integral color or acid stain for rich earth tones

$11.00/SF

26% · $5,060 at 460 SF

Broom Finish

Classic slip-resistant surface, most affordable option

$8.00/SF

24% · $3,680 at 460 SF

Exposed Aggregate

Natural stone and pebble texture revealed through washing

$11.00/SF

16% · $5,060 at 460 SF

82 stamp patterns, one price

The pattern you pick does not move the $15.00/SF rate, so choose on looks rather than budget. These are the looks Dallas homeowners ask for most.

Natural stone

Irregular, quarried-looking joints. The most requested look in DFW backyards.

Random Stone · Castle Stone · Mesa Stone · Canyon Stone · Flagstone

Slate

Tighter, more uniform texture that reads contemporary next to modern elevations.

Italian Slate · Roman Slate · New England Slate · Fractured Cyprus Slate

Ashlar and cut stone

Squared, repeating courses. Reads formal and pairs well with brick homes.

Grand Ashlar · Cut Slate (Small) · York Bluestone · Verona Stone

Seamless texture

No joint lines at all, just surface texture. Good over large uninterrupted pours.

Sedona Seamless · Arizona · Venetian Marble

Permits in Dallas

Dallas requires permits for driveways and patios connecting to the public right-of-way. Backyard patios without roofing or utilities are generally exempt. Processing can take 10-15 business days.

Office
City of Dallas Building Inspection
Fees
$50-$350 depending on project scope

Stamping does not change whether you need a permit. That depends on where the slab sits, not how it is finished.

Stamped concrete questions from Dallas homeowners

Stamped concrete runs $15.00/SF in Dallas (2026 DFW rates). At the Dallas average patio size of 460 SF that is about $6,900. Large pours qualify for volume pricing at $14.25/SF.

Stamped costs about $3,220 more than broom finish on a 460 SF patio ($15.00/SF vs $8.00/SF). It is the same slab underneath: same 3,500 PSI concrete, same thickness, same reinforcement. You are paying for the pattern, the color release, and the labor to stamp before the pour sets.

Four inches of 3,500 PSI concrete is standard for a Dallas patio. Go to six inches under anything heavy such as an outdoor kitchen or a hot tub. DFW sits on expansive clay, so wire mesh or rebar goes in every pour regardless of finish.

82 rentable patterns, grouped into natural stone, slate, ashlar and cut stone, and seamless texture looks. The pattern does not change the $15.00/SF rate, so pick on looks rather than budget.

Dallas requires permits for driveways and patios connecting to the public right-of-way. Backyard patios without roofing or utilities are generally exempt. Processing can take 10-15 business days. Permit fees run $50-$350 depending on project scope through City of Dallas Building Inspection. Stamping does not change whether a permit is required: that depends on where the slab sits, not how it is finished.

Data source: 71+ pAIsaLocal concrete project data points in Dallas, TX, collected 2024–August 2026.